XM503 Mini Road Cold Milling Machine 500mm 0-40m/min Working Speed
Quick look of XM503 Mini Road Cold Milling Machine
Rated power/speed: 92/2200kw/rpm
Working speed: 0-40m/min
Maximum milling width: 500mm
Maximum milling depth: 180mm
Number of tools: 54
Machine length×width×height: 3785×1765×3346mm
Technical specs:
| Item | Unit | Parameters |
| Engine manufacturer | - | Shangchai |
| Rated power/speed | (kw/rpm) | 92/2200 |
| Working speed | (m/min) | 0-40 |
| Driving speed | (km/h) | 0-6 |
| Gradeability | (%) | 50 |
| Ground clearance | (mm) | 180 |
| Working weight | (kg) | 7800/7300 |
| Maximum milling width | (mm) | 500 |
| Maximum milling depth | (mm) | 180 |
| Number of tools | (pcs) | 54 |
| Milling wheel diameter with tool | (mm) | 660 |
| Machine length×width×height | (mm) | 3785×1765×3346 |
| Belt conveyor length × width × height | (mm) | 2000X800X600 |
| Fuel tank | (L) | 140 |
| Hydraulic tank | (L) | 120 |
| Water tank | (L) | 300 |
Advantages for XM503 Mini Road Cold Milling Machine
●XM503 Mini Road Cold Milling Machine adopts three-wheel full drive, hydraulic and mechanical drive milling drum, and optional waste recycling device. It has the obvious characteristics of simple operation, flexible maneuverability, strong driving ability, high construction efficiency, multi-function, low price and good quality.
●XM503 Mini Road Cold Milling Machine has two systems of service brake and parking brake.
● The milling depth control is adjusted by the lifting and lowering of the left and right rear legs, allowing the use of different adjustment positions of the left and right legs to perform wedge milling; a depth indicator is installed on the rear legs to display the
milling depth. The equipment can be equipped with an automatic leveling system.
● The rear wheel is an independent suspended support wheel. The right rear wheel can swing back inward to facilitate welt milling.
● The walking system is tire-type, three-wheel all-wheel drive, hydraulic and mechanical drive mode, can be continuously variable, and has high and low gears to meet the requirements of rapid transfer and milling operations.
● The milling system adopts hydraulic and mechanical transmission, which makes milling efficient and powerful; imported cutter heads ensure the service life of cutters. And can realize welt milling, milling along the manhole cover.
● Full hydraulic steering, with the characteristics of light and flexible operation.
● The seat position of the driver's platform can be adjusted front and rear; the operating platform is spacious, and the driver can walk freely; the electrical system is equipped with controllers and displays, the instrument panel and the control handles conform to the ergonomic design concept, and the operation is comfortable and the vision is good.
● Hydraulic pick (optional): quick-change joint connection, which can realize road crushing.
● Maintainability: The optimized structure design of the whole vehicle makes it easier to maintain.
● Rumble wheel (optional): The two rear wheels are replaced with special rumble wheels, which can be used for roadside rumble belt milling.
● Conveying system (optional): Short hydraulic motor drives the waste recycling system, greatly improving construction efficiency.
Product Tags:
|
|
500mm 40m/min XM503 2200kw Road Construction Machines Images
|
